46
5
Push out Control Panel Asm after
Push the Hook( , ) below.
1
The Top Plate Asm is disassembled.
2
Pull out the Drawer Panel Asm and unscrew
2 screws.
4
Two screws are unscrewed.
6
Unscrew the screws from the Lower Cover.
7
Disassembly Cap Cover and Pump Case.
8
Unscrew the screw from the Cabinet Cover Asm.
9
Remove Gasket Clamp and release Gasket from
Cabinet Cover.
1
2
3
Lift the side the Control Panel Asm and
pull it out.
CABINET COVER
To Next Page
Loading...
