LG F4V910 TS Series - User Manual

LG F4V910 TS Series

48 pages

To Next Page

To Next Page

Loading...

www.lge.com

Copyright © 2019 LG Electronics Inc. All Rights Reserved

OWNER'S MANUAL

WASHING

MACHINE

Before beginning installation, read these instructions carefully.

This will simplify installation and ensure that the product is installed correctly

and safely. Leave these instructions near the product after installation for future

reference.

EN ENGLISH

F4V910*TS FV90JNS2Q F4WV910P2 F4WV910P2S

F4V909*TS F4WV909P2 FV90VNS2Q

MFL69478486

Rev.00_020119

Questions and Answers:

R
Rebecca ThomasSep 6, 2025
Why does my LG F4V910 TS show a 1E INLET ERROR?
- J
  Jennifer PenaSep 6, 2025
  If your LG Washer displays a 1E INLET ERROR, it indicates a water supply issue. Start by checking another tap in your house to ensure adequate water supply. Make sure the water supply tap is fully open. Inspect the water supply hoses for any kinks and straighten them or reinstall the hose. Also, check and clean the filter of the inlet hose. If you find water leakage in the aqua stop supply hose and the indicator is red, replace the aqua stop supply hose.
G
Gregory SantosAug 22, 2025
Why does my LG Washer show a UE UNBALANCE ERROR?
- B
  Brittany MorganAug 22, 2025
  The UE UNBALANCE ERROR in your LG Washer can occur if the laundry load is too wet at the end of the cycle. To resolve this, rearrange the load to allow proper spinning, then close the door and press the Start/Pause button. It may take a moment for the appliance to begin spinning, as the door must be locked first. Another cause is a load that is too small. Try adding one or two similar items or smaller articles of laundry to help balance the load. Close the door and press Start/Pause button again.
N
Nancy WileySep 3, 2025
What to do if the door is open on LG F4V910 TS Washer?
- S
  Sean SchmidtSep 3, 2025
  If the door of your LG Washer is open, close it and ensure that nothing is caught under the door preventing it from closing completely.
A
Alexandra AlexanderSep 2, 2025
Why is my LG F4V910 TS making a rattling noise?
- S
  samantha31Sep 2, 2025
  If your LG Washer is making a rattling or clanking noise, there may be foreign objects like keys, coins, or safety pins in the drum. Stop the appliance and check the drum for these objects. If the noise continues after restarting, call for service.
L
Lindsay GentrySep 1, 2025
Why does my LG Washer make a thumping sound?
- K
  Kevin JonesSep 1, 2025
  A thumping sound in your LG Washer is often normal with heavy wash loads. However, if the sound persists, the appliance might be out of balance. Stop the appliance and redistribute the wash load.
J
Jennifer WilliamsAug 30, 2025
Why does my LG F4V910 TS Washer not operate?
- A
  Amber SmithAug 30, 2025
  If your LG Washer isn't operating, first check if the control panel has powered off due to inactivity and press the Power button to turn it on. Next, ensure the appliance is securely plugged into a working outlet. Finally, verify that the water supply is turned on completely.
W
waderussellAug 29, 2025
What to do if my LG Washer shows OE WATER OUTLET ERROR?
- V
  Valerie LyonsAug 29, 2025
  The OE WATER OUTLET ERROR on your LG Washer means there's an issue with the water draining. This can happen if the drain hose is kinked or clogged, so clean and straighten the drain hose. Also, the drain filter might be clogged. Check and clean the drain filter to resolve this issue.
T
tjonesAug 27, 2025
How to fix 1E INLET ERROR on LG F4V910 TS Washer?
- P
  Patrick MillerAug 27, 2025
  The 1E INLET ERROR on your LG Washer indicates that the water supply is not adequate. First, check another tap in the house to ensure the water supply is sufficient. Make sure that the water supply tap is fully open. Inspect the water supply hoses for any kinks and straighten them or reinstall the hose. Also, the filter of the supply hoses might be clogged, so check and clean the filter. If water leakage occurs in the aqua stop supply hose, replace it.
M
Michael StewartAug 27, 2025
What to do if my LG F4V910 TS shows UE unbalance error?
- B
  Becky FreemanAug 27, 2025
  If your LG Washer displays a UE UNBALANCE ERROR, it could be due to the laundry being too wet or the load being too small. To resolve this, rearrange the load to allow proper spinning, then close the door and press the Start/Pause button. If the load is too small, add one or two similar items to help balance it, then close the door and press Start/Pause. Note that the door must be locked before spin can be achieved.
S
Shelly BruceAug 25, 2025
Why is my LG F4V910 TS leaking water?
- E
  Eric SmithAug 26, 2025
  If your LG Washer is leaking, the house drain pipes may be clogged; unclog the drain pipe or contact a plumber if necessary. Alternatively, leakage may be caused by improper installation or a clogged drain hose, so clean and straighten the drain hose and check/clean the drain filter regularly.

LG F4V910 TS Series Specifications

General

Brand	LG
Model	F4V910 TS Series
Category	Washer
Language	English

Related product manuals

Preview: LG F4V909 TS Series

LG F4V909 TS Series

LG F4V710 TS Series

Preview: LG F4V9BWP2E

Preview: LG F4V909WTSA

Preview: LG F4V5RYP2T

Preview: LG F4V1112WTSA

Preview: LG F4V310 Series

LG F4V310 Series

LG F4V509 Series

Preview: LG F4V309 N Series

LG F4V309 N Series

LG F4V5 YP2T Series

LG F4V310 NEH Series