LG FA168 - Radio Operations; Listening to the Radio; Improving Poor FM Reception; Presetting the Radio Stations

Operating22
Operating
3
Radio Operations
Listening to the radio
1. Press FUNCTION or FUNC. until FM appears in
the display window.
The last received station is tuned in.
2. Auto tuning : Press and hold
C
/
V
on the
unit or TUNING -/+ on the remote control for
about 2 seconds until the frequency indication
starts changing, then release. Scanning stops
when the unit tunes in a station.
Manual tuning : Press
C
/
V
on the unit or
TUNING -/+ on the remote control repeatedly.
3. Adjust the volume by pressing VOL+/-.
Improving poor FM reception
Press
d
/
M
. This will change the tuner from stereo
to mono. Then the reception will be better than
before.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Press FUNCTION or FUNC. until FM appears in
the display window.
2. Select the desired frequency by pressing
C
/
V
on the unit or TUNING -/+ on the remote
control.
3. Press PROGRAM/MEMORY on the remote
control. A preset number will blink in the display
window.
4. Press PRESETFOLDER
W
/
S
on the remote
control to select the preset number you want.
5. Press PROGRAM/MEMORY. The station is
stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESETFOLDER
W
/
S
.
Deleting all the saved stations
1. Press and hold PROGRAM/MEMORY on the
remote control for two seconds. “ERASE ALL” will
blink on the display window.
2. Press PROGRAM/MEMORY to erase all saved
radio stations.
Seeing information about a
Radio station
The FM tuner is supplied with the RDS (Radio Data
System) facility. This shows information about the
radio station being listened to. Press RDS/SET
repeatedly to cycle through the various data types:
PS (Programme Service Name)
The name of the channel will appear in
the display.
PTY (Programme Type Recognition)
The programme type (e.g. Jazz or News)
will appear in the display.
RT (Radio Text)
A text message contains special
information from the broadcast station.
This text may scroll across the display.
CT (Time controlled by the channel)
This shows the time as broadcast by the
station.
You can search the radio stations by programme
type by pressing RDS/SET. The display will show
the last PTY in use. Press PTY one or more times to
select your preferred programme type. Press and
hold
C
/
V
. The tuner will search automatically.
When a station is found the search will stop.