LG FB44 - OSD Initial Language Settings - Optional; Initial Settings the Area Code - Optional

7
Initial settings the Area Code -
Optional
When you use this unit for the rst time, you have to set the Area Code as shown
below.
ON REMOTE
1 Display setup menu
SETUP
2 Select LOCK menu on the rst level
U u
3
Move to second level
The activated Area Code appears on the second
level.
i
4 Move to the third level
i
5 Enter a new password Numeric (0-9)
and ENTER
6 Recheck the entered new password Numeric (0-9)
and ENTER
7
Select a code for a geographic area
After select, Rating and Password will be activated.
U u I i
8
To conrm what you press
Make sure to nish setting the Area Code.
ENTER
OSD initial language settings - Optional
During the rst use of this unit, the initial language setup menu appears on your
TV screen. You must complete initial language selection before using the unit.
ON REMOTE
1 Turn the power on
The language list appears.
POWER
2 Select the language
IiUu
3 Press ENTER
4 To conrm press
ENTER