3-3
ONE POINT REPAIR GUIDE
NO POWER PROBLEM
No power problem occurs when you power on the unit.
1-2. No Charge
1-2-1. Solution
Replace F2, R6, R8 on SMPS board.
1-2-2. How to troubleshoot (Countermeasure)
Case 1) VD (11 V-15.3 V) Abnormal: Check AC TO DC circuit.
Case 2) CN1 (10.5 V-14.8 V) Abnormal: Check F2, R6, R8 and replace it.
1-2-3. Service hint (Any picture/ Remark)
< SMPS circuit >
< SMPS board view >
F2
F2
Case 1
Case 2
Case 2
Case 1