LG Flatron W1934S - SERVICE OSD OPERATIONS; SVC OSD Menu Features

16
SERVICE OSD
1) Press MENU Key and Power Key, Monitor Will Enter Service OSD.
2) The SVC OSD menu contains additional menus that the User OSD menu as described below.
a) Auto Color : W/B balance and Automatically sets the gain and offset value.
b) NVRAM INIT : EEPROM initialize.(24C04)
c) CLEAR ETI : To initialize using time.
d) AGING : Select Aging mode(on/off).
e) R/G/B-9300K : Allows you to set the R/G/B-9300K value manually.
f) R/G/B-6500K : Allows you to set the R/G/B-6500K value manually.
g) R/G/B-Offset : Allows you to set the R/G/B-Offset value manually.(Analog Only)
h) R/G/B-Gain : Allows you to set the R/G/B-Gain value manually.(Analog Only)
i) MODULE : Show Current module Type
j)RS232: Enable/Disable Debug Mode(on/off)
k)SRGB:Allows you to set the sRGB value manually
Insert to
Parallel Port
on PC
ISP Board
LCD
Monitor D-
Sub
Parallel
Port
D-SUB 15PIN
Figure 1.Cable Connection For ISP