- 7 -
1. Application range
This specification is applied to 19"/22" Wide Monitor TV
used LP69G chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
(1) Power Voltage : Standard input voltage (100~240V@,
50/60Hz)
*Standard Voltage of each products is marked by models.
(2) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
(3) The receiver must be operated for about 20 minutes prior
to the adjustment.
3. Test method
3.1 Performance : LGE test method followed
3.2 Demanded other specification
Safety : CE, IEC Specification
EMC : CE, IEC
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement
.
4-1. General Specification
4.1.1 TV
4. General Specification(TV)
No Item Specification Remark
1 Video input applicable system NTSC, NTSC 4.43
2 Receivable Broadcasting System PAL N/M, NTSC M CHILE
3 RF Input Channel VHF : 2 ~ 13
UHF : 14 ~ 69 PAL N/M, NTSC
CATV : 1 ~ 125
4 Input Voltage AC 100-240V, 50Hz/60Hz
5 Market CHILE
6 Tuning System FS PAL N/M, NTSC
7 Operating Environment Temp : 10°C~ 35°C
Humidity : 20% ~ 80%
8 Storage Environment Temp : -10°C ~ 60°C non condensing
Humidity : 5%~90% non condensing
9 Display LCD Module
To Next Page
Loading...
Need help?
General
