LG G flex2 User Manual

87
FAQ
Category Question Answer
Unlock
Pattern
How do I create the
Unlock Pattern?
1. From the Home screen, touch and
hold
.
2. Tap System settings > Display tab
> Lock screen.
3. Tap Select screen lock > Pattern.
The first time you do this, a short
tutorial about creating an Unlock
Pattern appears.
4. Set up your pattern by drawing
itthen drawing it a second time for
confirmation.
Precautions to take when using the
pattern lock.
It is very important to remember
the unlock pattern you set. You can
nolonger access your phone if you
use an incorrect pattern five times.
You have five chances to enter your
unlock pattern, PIN or password. If you
have used all 5 opportunities, you can
try again after 30 seconds. (Or, if you
preset the backup PIN, you can use
the backup PIN code to unlock the
pattern.)

LG G flex2 Specifications

General

Display Size	5.5 inches
Resolution	1080 x 1920 pixels
Display Type	Curved P-OLED
Processor	Qualcomm MSM8994 Snapdragon 810
CPU	Octa-core (4x1.5 GHz Cortex-A53 & 4x2.0 GHz Cortex-A57)
GPU	Adreno 430
RAM	2GB / 3GB
Internal Storage	16GB / 32GB
Card Slot	microSD, up to 256 GB (dedicated slot)
Rear Camera	13 MP
Front Camera	2.1 MP
Battery Capacity	3000 mAh
Operating System	Android 5.0.1 (Lollipop), upgradable to 6.0.1 (Marshmallow)
Dimensions	149.1 x 75.3 x 7.1-9.4 mm
Weight	152 g
SIM	Micro-SIM
Protection	Corning Gorilla Glass 3
Network Technology	GSM / HSPA / LTE
2G Bands	GSM 850 / 900 / 1800 / 1900
3G Bands	HSDPA 850 / 900 / 1900 / 2100
Speed	HSPA 42.2/5.76 Mbps, LTE Cat6 300/50 Mbps
GPRS	Yes
EDGE	Yes
WLAN	Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, DLNA, hotspot
GPS	Yes, with A-GPS, GLONASS
NFC	Yes
Infrared Port	Yes
Radio	FM radio
Sensors	Accelerometer, gyro, proximity, compass
Colors	Platinum Silver, Flamenco Red
Rear Camera Features	panorama, HDR
Rear Camera Video	1080p@60fps, HDR, stereo sound rec.
Battery Type	Li-Po
4G Bands	1, 3, 7, 8, 20
Bluetooth	4.1, A2DP, aptX
USB	microUSB 2.0