11
Reversing Doors*
* This feature varies depending on the model purchased.
Your appliance is designed with reversible doors, do that
they may open from either the left of right hand side to
suit your kitchen design.
NOTE
• Reversing the doors must be performed by the
qualified personnel of LG Electronics. If not, the doors
will not be covered by the warranty.
Levelling the Appliance
To avoid vibration, the unit must be levelled.
If required, adjust the levelling screws to compensate for
the uneven floor.
The front should be slightly higher than the rear to aid in
door closing.
Levelling screws can be turned easily by tipping the
cabinet slightly.
Turn the levelling screws counterclockwise
m to raise
the unit, clockwise n to lower it.
Installing the Stoppers*
* This feature varies depending on the model purchased.
• Install the stoppers to the upper edge on the rear
plate of the appliance. The stoppers are supplied with
the kit in the appliance.
NOTE
• Stoppers should be installed to get higher efficiency in
operation of the appliance.
Connecting the Appliance
After installing the appliance, connect the power plug
into a socket outlet.
NOTE
• After connecting the power supply cord (or plug) to
the outlet, wait 2 or 3 hours before you put food into
the appliance. If you add food before the appliance
has cooled completely, your food may spoil.
Moving the Appliance
1
Remove all food from inside the appliance.
2
Pull the power plug out, insert and fix it into the
power plug hook at the rear or on top of the
appliance.
3
Tape parts such as shelves and the door handle to
prevent from falling off while moving the appliance.
4
Move the appliance with more than two people
carefully. When transporting the appliance over a
long distance, keep the appliance upright.
5
After installing the appliance, connect the power
plug into a socket out to switch on the appliance.
To Next Page
Loading...
Need help?
General
