58
PROGRAMMING MODE - TEST MODE
NOTE
• Washing time 10 minutes
• Rinse cycle twice
• Top spin speed 1,000 RPM
• Add SUPER WASH 3 minutes extra wash and one extra rinse
Entering set up mode.
You will see LqC1
Button Display
Press the
Colors
or the
Perm.Press
button until
appears in the display.
Press the
START
button.
Press the
Colors
button until
appears in the display.
Press the
START
button, then factory reset is done.
is displayed.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type – Turn on/off toggle switch.
• Card type – Insert the service card.
• OPL type – Push the Whites button twice.
2. Factory reset -
After factory reset, machine information is changed to the default value.
To Next Page
Loading...
Need help?
General
