LG GF-V708MBSL - Cleaning the Fresh Zone Compartment

43
EN
Cleaning the Fresh Zone
Compartment
Removing the Fresh Zone
Compartment (For Type 1)
1
Open the refrigerator doors all the way.
Empty and remove the Door-in-Door case
and bins. Clear off and remove all
refrigerator shelves. Remove all contents
from the Fresh Zone cover and drawers.
2
Lift the Fresh Zone drawers with both hands
and gently pull them toward you.
3
Grabbing the back of the Fresh Zone
compartment with one hand, tilt the
compartment up, and then remove it while
tilted.
Assembling the Fresh Zone
Compartment (For Type 1)
1
Hold the Fresh Zone compartment at an
angle and place it into the refrigerator
compartment.
2
Lift the Fresh Zone compartment to a
horizontal position, lower it to its original
position, and gently push it back into place.
3
If there is a gap behind the drawer, as seen
below, slightly lift the Fresh Zone
compartment and push it backward.
CAUTION
• Use two hands when removing or assembling
the Fresh Zone compartment.
• Open both refrigerator doors completely and
empty and remove the Door-in-Door case and
bins before removing or assembling the Fresh
Zone compartment.
NOTE
• You can determine what type of appliance it is
by looking at the label inside the fridge
compartment.