1-8
Copyright © 2020 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Using USB
Step 8. Update will start automatically.
VFD Model : Check VFD what module is in progress one by one.
In case of MEQ/PEQ, update will be progressed in short time since binary size are small,
so may not be recognized.
※ The numbers in VFD display of wireless modules will increase in progress as progress percent from 00 to 100.
Step 9. GX main unit will be off automatically after update fi nish. (Enter Standby Mode)
Step 10. In case of option, GX will be powered off and then power on.
Blink ‘STBY’ Diaplay is off during 5 sec Blink ‘STBY’
Step 11. Check the current versions to verify whether the update was successfully completed or not.
<VFD Model>
1) Press “Version Check” hidden key
• Version Check Hidden Key : Press Set “Vol-” + RCU “Play/Pause” for 3secs.
*5 char- Scroll
Update module VFD display
B/E
MICOM
Wireless Subwoofer Tx
Wireless Subwoofer Rx
Wireless Rear Tx
Wireless Rear Rx
MEQ
PEQ
Option
M-UPDATE
B-UPDATE
WT 00
WR 00
STBY WRITE STBY
RR 00
RT 00
WRITE
MQ-UPDATE
EQ-UPDATE
< VFD Display in Update >
+
To Next Page
Loading...
