LG GX500 - Page 114

- 115 -
Copyright © 2010 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
5. DOWNLOAD & S/W UPGRADE
1
Run USB Map Program and check solution click mapping start
1
.
Run
USB
Map
Program
and
check
solution
,
click
mapping
start
.
2. Connect the usb or nexus cable with the device in order of port number.
3. If you have the disable port, click “SKIP” button.
4. After mapping is completed, click “Save & Exit” button.
Connection in 1
st
port Connection in 2
nd
port Skip 3
rd
port