How to stop loud hum or noise from LG Home Theater System?
If you hear a loud hum or noise from your LG Home Theater System, clean the disc first. Then, ensure the speakers and components are securely connected. If the problem persists, try moving the TV away from the audio components.
How to fix LG HT303SD Receiver when there is no power?
If your LG Receiver has no power, the power cord might be disconnected. Ensure the power cord is securely plugged into the wall outlet.
Why is there no picture on my LG Home Theater System?
If there is no picture on your LG Home Theater System, first, ensure that your TV is set to the correct video input mode to receive the DVD signal. Next, check that the video cable is securely connected. Finally, verify that the TV is powered on.
How to troubleshoot no power on LG Receiver?
If your LG Receiver has no power, ensure the power cord is securely plugged into the wall outlet.
Why is there no sound coming from my LG Receiver?
If you experience no sound or a very low-level sound from your LG Receiver, consider the following possible causes: * The equipment connected with the audio cable is not set to receive DVD audio output, so select the correct input mode of the audio receiver. * The audio cables are not connected securely, so connect the audio cable into the jacks securely. * The power of the equipment connected with the audio cable is turned off, so turn on the equipment connected with the audio cable. * The audio connecting cable is damaged, so replace it with a new one.
What to do if there is no sound from my LG Receiver?
If you're experiencing no sound or very low sound, ensure the equipment connected with the audio cable is set to receive DVD audio. Check that the audio cables are securely connected. Verify that the connected equipment is powered on. If the audio connecting cable is damaged, replace it.
Why can't my LG Home Theater System tune in radio stations?
If you're unable to tune in radio stations, first, ensure the antenna is securely connected. If you're using automatic tuning, the signal strength may be too weak, so try tuning in the station manually. If tuning by scanning preset stations, you may need to preset the stations.
What to do if my LG Home Theater System has no power?
If your LG Home Theater System has no power, the most common cause is a disconnected power cord. Make sure the power cord is securely plugged into the wall outlet.
Why is my LG HT303SD Receiver remote control not working?
If the remote control isn't working properly, ensure it's pointed at the receiver's remote sensor and is within 23 ft (7 m). Remove any obstacles between the remote and the receiver. Also, check the batteries and replace them if necessary.
Why is my LG HT303SD remote control not working properly?
If the remote control for your LG Receiver isn't working, it could be due to several reasons: * Make sure that the remote control is pointed at the remote sensor on the DVD/CD Receiver. * Ensure you are within about 23 ft (7 m) of the DVD/CD Receiver. * Remove any obstacles between the remote control and the DVD/CD Receiver. * The batteries in the remote control might be flat, replace them with new ones.
To Next Page
General
