To Next Page
N
Nicole WalkerAug 21, 2025
How to fix no power on my LG Home Theater System?
- GGregory GarciaAug 21, 2025
If your LG Home Theater System has no power, ensure the power cord is securely plugged into the wall outlet. This should resolve the issue.
How to fix no power on my LG Home Theater System?
If your LG Home Theater System has no power, ensure the power cord is securely plugged into the wall outlet. This should resolve the issue.
Why is my LG Home Theater System remote control not working?
If you're experiencing remote control issues with your LG Home Theater System, try the following: * Make sure the remote is pointed directly at the remote sensor on the DVD/CD Receiver. * Ensure you are within 23 ft (7 m) of the DVD/CD Receiver. * Remove any obstacles between the remote and the receiver. * Replace the batteries in the remote with new ones.
Why is my LG Receiver remote control not working?
If the remote control for your LG Receiver isn't working properly, consider these possible causes: * The remote control may not be pointed at the remote sensor of the DVD/CD Receiver; point it correctly. * The remote control might be too far from the DVD/CD Receiver; use it within about 23 ft (7 m). * There may be an obstacle in the path of the remote control and the DVD/CD Receiver; remove it. * The batteries in the remote control may be flat; replace them with new ones.
Why is there no sound coming from my LG HT303SU Receiver?
If you experience no sound or only very low-level sound from your LG Receiver, check the following: * The equipment connected with the audio cable is not set to receive DVD audio; select the correct input mode of the equipment. * The audio cables are not connected securely; connect the audio cable into the jacks securely. * The power of the equipment connected with the audio cable is turned off; turn on the equipment connected with the audio cable. * The audio connecting cable is damaged; replace it with a new one.
What to do if there is no picture on my LG Home Theater System?
If your LG Home Theater System shows no picture, there are several things to check: 1. Ensure your TV is set to receive the DVD signal. 2. Check that the video cable is securely connected to the jacks. 3. Confirm that the connected TV is powered on.
How to troubleshoot no sound on LG Home Theater System?
If your LG Home Theater System has no sound or very low sound, check these items: 1. Verify that the equipment connected with the audio cable is set to receive DVD audio by selecting the correct input mode. 2. Ensure the audio cables are securely connected. 3. Confirm that the equipment connected with the audio cable is turned on. 4. If the problem persists, the audio connecting cable may be damaged; consider replacing it.
How to fix an LG HT303SU with no power?
If your LG Receiver has no power, the power cord might be disconnected. Ensure the power cord is securely plugged into the wall outlet.
What to do if there is no picture on my LG HT303SU?
If you're not getting a picture on your LG Receiver, it could be due to a few reasons: * The TV is not set to receive DVD signal; set the TV to receive the DVD signal. * The video cable is not connected securely; connect the video cable into the jacks securely. * The connected TV power is turned off; turn on the TV.
How to troubleshoot an LG HT303SU Receiver that won't start playback?
If your LG Receiver isn't starting playback, here are a few things to check: * No disc is inserted; insert a disc, ensuring the DVD or audio CD indicator is lit. * An unplayable disc is inserted; insert a playable disc, checking the disc type, color system, and regional code. * The disc is placed upside down; place the disc with the playback side down. * The disc is not placed within the guide; place the disc correctly on the disc tray inside the guide. * The disc is dirty; clean the disc. * A menu is on the TV screen; press the SETUP button to turn off the menu screen. * The Rating level is set; cancel the Rating function or change the rating level.
What causes a loud hum or noise from my LG HT303SU?
A loud hum or noise from your LG Receiver can be caused by a few things: * The disc is dirty; clean the disc. * The speakers and components are connected poorly; connect the speakers and components securely. * The DVD/CD Receiver is located too close to the TV; move your TV away from the audio components.
General| RMS rated power | 300 W |
|---|---|
| Audio output channels | 5.1 channels |
| Audio system | DTS, Dolby Digital, Dolby PrologicⅡ, DSP |
| Center speaker RMS power | 45 W |
| Center speaker impedance | 4 Ω |
| AM band range | 522 - 1620 kHz |
| FM band range | 87.5 - 108 MHz |
| Radio Data System (RDS) | Yes |
| Preset stations quantity | 50 |
| Number of optical discs | 1 discs |
| Optical disc player type | DVD player |
| USB version | 2.0 |
| Component video (YPbPr/YCbCr) out | 1 |
