What to do if my LG HT313SU remote control does not work?
If the remote isn't working, first point it directly at the remote sensor on the receiver. Ensure you're within 23 ft (7 m) of the unit and that there are no obstacles blocking the signal. If it still doesn't work, replace the batteries with new ones.
How to fix loud hum or noise from LG Receiver?
To address loud humming or noise, start by cleaning the disc. Also, ensure that the speakers and components are securely connected. If the issue persists, try moving the TV away from the audio components.
What to do if there is no sound from LG HT313SU Receiver?
If you're experiencing no sound or very low sound, first ensure the equipment connected with the audio cable is set to receive DVD sound by selecting the correct input mode. Check that the audio cables are securely connected and that the connected equipment is powered on. If the problem continues, the audio connecting cable may be damaged, and you should replace it.
Why won't my LG HT313SU Receiver start playback?
If the receiver won't start playback, make sure a playable disc is inserted correctly (playback side down), and that it's placed within the guide on the disc tray. Also, ensure the disc is clean. If a menu is on the TV screen, press the SETUP button to turn it off. Finally, check if the Rating level is set and, if so, cancel the Rating function or change the rating level.
How to adjust the front panel display brightness on LG HT313SU Receiver?
To brighten the front panel display, press SLEEP(Dimmer) on the remote control.
Why is my LG Car Receiver remote control not working properly?
If you're experiencing issues with the remote control for your LG Car Receiver, try the following: * Ensure the remote is pointed directly at the remote sensor on the receiver. * Make sure you are within 23 ft (7 m) of the receiver. * Remove any obstacles between the remote and the receiver. * Replace the batteries in the remote with new ones.
What to do if my LG Car Receiver does not start playback?
If your LG Car Receiver does not start playback, consider these possible causes: 1. No disc is inserted: Insert a disc. 2. An unplayable disc is inserted: Insert a playable disc. 3. The disc is placed upside down: Place the disc with the playback side down. 4. The disc is not placed within the guide: Place the disc on the disc tray correctly inside the guide. 5. The disc is dirty: Clean the disc. 6. A menu is on the TV screen: Press the SETUP button to turn off the menu screen. 7. The Rating level is set: Cancel the Rating function or change the rating level.
Why is there no picture on my LG Car Receiver?
If you're getting no picture on your LG Car Receiver, check these potential causes: * Ensure the TV is set to receive the DVD signal. * Verify the video cable is securely connected into the jacks. * Confirm that the connected TV power is turned on.
Why is there a loud hum or noise heard from my LG Car Receiver?
If you are experiencing loud hum or noise from your LG Car Receiver, consider the following: * The disc may be dirty, so clean the disc. * The speakers and components may be connected poorly, so connect them securely. * The DVD/CD Receiver may be located too close to the TV, so move the TV away from the audio components.
What to do if there is no sound or only a very low-level sound heard from my LG Car Receiver?
If you're not getting any sound or only a very low-level sound from your LG Car Receiver, check the following: * Ensure the equipment connected with the audio cable is set to receive DVD audio; select the correct input mode. * Make sure the audio cables are securely connected into the jacks. * Verify that the power of the equipment connected with the audio cable is turned on. * If the audio connecting cable is damaged, replace it with a new one.
To Next Page
General
