Why is there no sound from my LG HT552PH, or the sound is very low?
Check that the equipment connected with the audio cable is set to receive DVD audio signal output. Ensure the audio cables are securely connected. Verify that the connected equipment is powered on. If the issue persists, the audio connecting cable may be damaged and should be replaced.
How to fix an LG HT552PH that has no power?
If your LG Receiver isn't turning on, the power cord might be disconnected. Ensure the power cord is securely plugged into the wall outlet.
What to do if my LG Receiver has no picture?
If there is no picture on your LG DVD/CD Receiver, make sure of the following: * The TV is set to the correct video input mode to receive the DVD signal. * The video cable is securely connected to the jacks. * The connected TV is turned on.
Why is there no sound from my LG HT552PH Receiver?
If you're experiencing no sound or very low sound from your LG DVD/CD Receiver, here are a few things to check: 1. Ensure the equipment connected with the audio cable is set to receive DVD signal output. Select the correct input mode on the audio receiver. 2. Verify the audio cables are securely connected into the jacks. 3. Confirm that the equipment connected with the audio cable is turned on. 4. If the issue persists, the audio connecting cable may be damaged. Try replacing it with a new one.
What to do if LG Receiver remote control is not working?
If the remote control for your LG DVD/CD Receiver isn't working correctly, consider the following: * Ensure the remote is pointed directly at the receiver's remote sensor. * Make sure you are within 23 ft (7 m) of the receiver. * Remove any obstacles between the remote and the receiver. * Replace the remote's batteries with new ones.
How to fix loud hum or noise heard from LG Receiver?
Ensure the disc is clean. Check that the speakers and components are securely connected. Also, move the TV away from the audio components to reduce interference.
What to do if the LG Receiver remote control does not work properly?
If the remote control isn't working, make sure you're pointing it directly at the receiver's remote sensor from a distance of no more than 23 ft (7 m). Remove any obstacles that might be blocking the signal. If it still doesn't work, try replacing the batteries with new ones.
Why is there no sound coming from my LG HT552PH Receiver?
If you are experiencing a lack of sound or very low sound from your LG Receiver, consider the following: * Ensure the equipment connected with the audio cable is set to receive DVD audio signal output. * Check that the audio cables are securely connected. * Verify that the equipment connected with the audio cable is powered on. * If the audio connecting cable is damaged, replace it.
Why is my LG HT552PH Receiver remote control not working?
If the remote control for your LG Receiver isn't working correctly, consider these potential causes: * Ensure the remote control is pointed at the remote sensor on the receiver. * Make sure you are within 23 ft (7 m) of the receiver. * Remove any obstacles blocking the path between the remote and the receiver. * Replace the batteries in the remote control with new ones.
To Next Page
General
