10
Setup the Wireless System
Note:
If there is a strong electromagnetic wave product
nearby, an interference may be occurred. Put the unit
(Wireless Receiver and main unit) away from there.
(Ex : Micro wave oven)
Wireless transmitter
LED indicator of
wireless transmitter
* LED indicator - “BLUE”
The main set is turned on, everthing is connected
and transmitting.
* LED indicator - “RED”
The wireless transmitter is in standby mode.
* LED indicator - “OFF (No display)”
The main set is turned off.
Wireless Receiver
LED indicator of Wireless Receiver
* LED indicator - “BLUE”
The
Wireless Receiver is receiving a signal of
wireless transmitter.
* LED indicator - “RED”
The Wireless Receiver is in standby mode.
Assembling and Connecting to
the Speakers
The front speakers are detached from the speaker
stands. Connect the speaker cords and assemble the
front speakers from speaker stands as illustrated.
1. Connect the speaker cords to the appropriate
terminals on the bottom of each front speaker.
2. Attach the front speakers to the speaker stands by
rotating the screw.
LED indicator
Displays the operating
status.
To Next Page
Loading...
Need help?
General
