22
Connecting
2
Connecting
Wireless connection
Connect the AC power cords of all the systems to a
wall outlet.
When you turn on the player, the wireless
connection will be completed automatically.
LED indicator
LED Color Operation
Blue (Blink)
The connection is not
completed.
Blue The connection is completed.
Red
The connection is in standby
mode or failed.
O
(No display)
The AC power cord is unplugged.
y
Be sure to match the speaker, cable to the
appropriate terminal on the unit: + to + and
– to –. If the cables are reversed, the sound
will be distorted and will lack bass.
y
If there is a strong electromagnetic wave
product nearby, interference may occur. Put
the unit (wireless subwoofer and main unit)
away from there.
y
It takes a few seconds (and may take longer)
for the player with the built-in wireless
transmitter and wireless subwoofer to
communicate with each other.
y
The available range is 20 m for wireless
connection in an open place.
,
Note
Wireless connection, manually
You can set up wireless connection manually, when
your connection is not completed.
Refer to the "Connect wireless speakers" on page
37.
To Next Page
Loading...
