A28A28
Installing the Wall mount plate
This monitor satisfies the specifications of the Wall mount plate or
the interchange device.
1. Place the monitor with its front facing downward on a soft cloth.
2
.
Separate the stand after firstly separating 6 screws by using a driver as figure.
Wall mount plate(Separate purchase)
This is stand-type or will mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount plate is
purchased.
3.
Install the Wall mount plate.
Kensington Security Slot
Connected to a locking
cable that can be purchased
separately at most
computer stores
To Next Page
Loading...
