Getting Started8
Getting Started
1
A F (Function)
Selects the function and input source.
B p/o (Volume)
Adjusts volume level.
C 1 (Standby/On)
D Remote sensor
E Function LED
y You can check current function through
the LED.
y This unit turns off LED If there is no key
input for 20 seconds. To display LED,
press any button.
y Standby LED quickly blinks when you
press any button.
y Bluetooth LED blinks when you select
Bluetooth function. if you connect
Bluetooth device, LED will turn on.
,
Note
F MUTE LED
G AUTO POWER LED
H Standby LED
It lights up in red on standby mode.
Precautions in using the touch buttons
y Use the touch buttons with clean and dry
hands.
- In a humid environment, wipe out any
moisture on the touch buttons before using.
y Do not press the touch buttons hard to make
it work.
- If you apply too much strength, it can
damage the sensor of the touch buttons.
y Touch the button that you want to work in
order to operate the function correctly.
y Be careful not to have any conductive
material such as metallic object on the touch
buttons. It can cause malfunctions.
,
Note
Front panel
A
B
C
D
E
HFG
To Next Page
Loading...
