4-2 Display Panel
- 8 -
• If you want to delay
the start of selected
program, press this
button before pressing
start button.
• Pressing the delay
time will increase
time by 1 hour.
• The delay start time
can be adjusted from
1 hour to 19 hours.
• In case of small load, use upper
or lower rack only to save
energy.
• With each press, can select
upper or lower rack only.
• In case you don’t select this
button, the machine always
works vario washing, which
operate upper and lower spray
arm alternately.
• For operating, press this
button first for power
on.
• After operating, this
button automatically
switches off for safety
and energy saving.
• If case of irregular surge
disturbances to the
machine, the power may
be automatically turned
off for safety.
DELAY START
BUTTON
• Indication of
remaining time
• Self diagnosis and
error message
display
REMAINING TIME
POWER SWITCH
BUTTON
HALF LOAD
• When power is on,
program is
automatically set to
Eco 65℃.
• If you want to change
the program, press the
button and set the
program you want to.
PROGRAM
• With each press,
rinse+, rinse+ &
77℃ sani rinse,
77℃ sani rinse is
repeated.
RINSE/
SANI
• Used to lock or unlock
the control buttons to
prevent all the setting
from being changed by a
child.
• For locking/unlocking,
press Delay Start and
Program button
simultaneously.
CHILD LOCK
• With each press, Start
and Pause is repeated
during operation.
• If the machine remains
in Pause mode for 10
minutes, the power is
automatically turned
off.
START/PAUSE
BUTTON
To Next Page
Loading...
