4-2 Display Panel
- 8 -
• If you want to delay
the start of selected
program, press this
button before
pressing start button.
• Pressing the delay
time will increase
time by 1 hour.
• The delay start time
can be adjusted from
1 hour to 19 hours.
• In case of small load, use upper
or lower rack only to save
energy.
• With each press, can select upper
or lower rack only.
• In case you don’t select this
button, the machine always
works vario washing, which
operate upper and lower spray
arm alternately.
• For operating, press this
button first for power
on.
• After operating, this
button automatically
switches off for safety
and energy saving.
• If case of irregular surge
disturbances to the
machine, the power may
be automatically turned
off for safety.
DELAY START
BUTTON
• When power is
on, program is
automatically set
to normal.
• If you want to
change the
program, press the
button and set the
program you want
to.
PROGRAM
• This function is for
saving time and
energy.
• With each press, time
save ON and OFF is
repeated.
• When select this
function, the operating
time will be shorten.
TIME SAVE
• With each
press,
rinse+,
rinse+ &
77℃ sani
rinse,
77℃ sani
rinse is
repeated.
RINSE/
SANI
POWER SWITCH
BUTTON
• Used to lock or unlock
the control buttons to
prevent all the setting
from being changed by
a child.
• For locking/unlocking,
press Delay Start and
T-Save button
simultaneously.
CHILD LOCK
HALF LOAD
• With each press,
Start and Pause is
repeated during
operation.
• If the machine
remains in Pause
mode for 10
minutes, the power
is automatically
turned off.
START/PAUSE
BUTTON
• Indication of
remaining
time
• Self diagnosis
and error
message
display
REMAINING
TIME
To Next Page
Loading...
