LG LD-1415M - Control Panel Operations; LD-1426 T Display Panel

4-2 Display Panel
4-2-1. LD-1426T
- 8 -
PROGRAM
• When you want to
select program, press
each button.
BEEP ON / OFF
• The dishwasher must be switched
off.
• The beep on/off function can be
set by pressing the Half Load and
Power button simultaneously for
seconds, then a “on” will appear
in the time display.
• To change the setting, press the
Half Load button.
• The beep on/off function is
automatically canceled when
power failure occur.
CHILD
LOCK
• Used to lock or
unlock the
control buttons
to prevent all
the setting from
being changed
by a child.
• For locking /
unlocking, press
Auto and Quick
button
simultaneously.
EXTRA HOT
/ RINSE+
• With each press,
77℃ extra hot,
Rinse+, 77℃
extra hot & Rinse+
is repeated.
TIME DELAY
• If you want to delay the start
of selected program, press
this button before start.
• Pressing the delay time will
increase time by 1 hour.
• The delay start time can be
adjusted from 1 hour to 19
hours.
SPRAY
INTENSITY
• With each press, the
level of water jet is
changed to “Strong”,
“Medium”, and
“Soft”.
HALF LOAD
• In case of small load, use
upper or lower rack only
to save energy.
• With each press, can
select upper or lower rack
only.
• In case you don’t select
this button, the machine
always works vario
washing, which operate
upper and lower spray
arm alternately.
POWER
• For operating, press
this button first for
power on.
• After operating, this
button automatically
switches off for safety
and energy saving.
• In case of irregular
surge disturbances to
the machine, the power
may be automatically
turned off for safety.