33
TROUBLE SHOOTING GUIDE
Symptom Possible Causes Solution
The display shows
IE code.
Water is not properly supplied.
• Bent water supply hose.
• Less than 50kpa of water pressure
• The filter of the water supply hose
is clogged
• Frozen water in the water supply
part in winter.
Check water outage or
the valve of water supply
connecting part.
Clean the water supply valve
lters.
Call for service if the same
problem occurs again.
The display shows
OE code.
Drainage problem.
• Clogged drainage hose (Condition
& Error code)
• The lters inside the dishwasher
are clogged.
• Bent drainage hose
• Wrong installation of drainage
hose. (drainage connection point is
not drilled out)
• Wrong installation of the connecting
part of drainage hose
Clean the drainage hose.
Clean the filters.
Check the installation of the
drainage hose.
Call for service if the same
problem occurs again.
What to do when you see condition & error code.
Display code (Condition & Error code)
To Next Page
Loading...
