ROUBLE SHOOTING GUIDE
T
23
Problem
The display shows "OE"
code. (Water is not
pumped away.)
• Straighten hose(s).
• Clean the filter.
• If you can not solve
the problem, call for
service.
• The drain hose is kinked.
• The filter is clogged.
• Motor trouble.
(Washing motor or Drain motor)
The display shows "IE"
code.
• Check the water tap.
• If you can not solve
the problem, call for
service.
• Water is not supplied.
• Water tap is not opened.
• Water sensor has a trouble.
The display shows "EI"
code.
(Automatically Drain
pump operated.)
• Close the water tap
and unplug the power
plug.
• Call for service.
• Water is leaking from the hose
connections.
• Damage to the unit has been
caused by a water leak.
The display shows "FE"
code. (Automatically
Drain pump operated.)
• Excessive water is supplied than
the normal water level.
• There is a problem with the inlet
valve.
The display shows "HE"
code.
• The water heater circuit is damaged.
The display shows "tE"
code.
The display shows "LE"
code.
The display shows "CE"
code.
• Thermistor trouble or very high inlet
water temperature.
• Motor trouble.
• Motor trouble.
SolutionPossible Causes
MFL30149726 2008.3.19 4:57 PM 페이지23 001 GateRip_A4
To Next Page
Loading...
