15
Assembling and Connecting to
the Speakers
The front and rear speakers are detached from the
speaker stands. Connect the speaker cords and
assemble the front and rear speakers from speaker
stands as illustrated.
1. Connect the speaker cords to the appropriate
terminals on the bottom of each front and rear
speaker.
2. Attach the front and rear speakers to the speaker
stands by rotating the screw.
Speaker System Connection
Connect the speakers using the supplied speaker
wires.
To obtain the best possible surround sound, adjust the
speaker parameters (volume, distance, etc.).
Notes:
• Be sure to match the speaker wire to the
appropriate terminal on the components: + to + and
– to –. If the cables are reversed, the sound will be
distorted and will lack bass.
• If you use front speakers with low maximum input
rating, adjust the volume carefully to avoid
excessive output on the speakers.
Installation and Setup
Front speaker
(Right)
Front speaker
(Left)
Rear speaker
(Right surround)
Rear speaker
(Left surround)
Subwoofer
Center speaker
To Next Page
Loading...
