CONTROL PANEL OVERVIEW
HS (Hot Surface) Indicator
stay on until the surface has cooled to approximately 150˚F/66˚C or when the self clean cycle ends.
PF (Power Failure) Indicator
The PF indicator will appear in the display if there has been a power interruption to the appliance. To clear the PF error, press
the CLEAR OFF button and reset the clock with the correct time of day.
Cooktop Element Control
Features
Oven Controls
Number Buttons
Start/
Lockout
Button
Button
Cooktop Element Controls are set up in the same order as the
corresponding elements.
NOTE
Warm Zone
To Next Page
Loading...
Need help?
General
