ENGLISH
35
CARE AND CLEANING
During Self Clean
y The self clean cycle uses extremely hot temperatures
to clean the oven cavity. While running the Self Clean
cycle, you may notice smoking or an odor.
This is normal, especially if the oven is heavily soiled.
y As the oven heats, you may hear sounds of metal
parts expanding and contracting. This is normal and
will not damage the oven.
y Do not force the oven door open when LOCKED is
displayed. The oven door will remain locked until the
oven temperature has cooled. Forcing the door open
will damage the door.
• The Self Clean cycle cannot be started if the
Lockout feature is active.
• Once the Self Clean cycle is set, the oven door will
lock automatically. You will not be able to open
the oven door until the oven is cooled. The lock
will release automatically.
• Once the door has been locked, the LOCKED
indicator light will stop ashing and remain on.
Allow about 15 seconds for the oven door lock to
activate.
• If the clock is set for a 12 hour display (default) the
Delayed Self Clean can never be set to start more
than 12 hours in advance.
NOTE
After the Self Clean cycle
y The oven door will remain locked until oven
temperature has cooled.
y You may notice some white ash in the oven. Wipe it
o with a damp cloth or a soap-lled steel wool pad
after the oven cools. If the oven is not clean after one
clean cycle, repeat the cycle.
y If oven racks were left in the oven and do not slide
smoothly after a clean cycle, wipe racks and rack
supports with a small amount of vegetable oil to
make them glide more easily.
y Fine lines may appear in the porcelain because it went
through heating and cooling. This is normal and will
not aect performance.
To Next Page
Loading...
Need help?
General
