I I1-_i
n:,_Hot Surface) MESSAGE
LIGHT WILL:
• Come on when the unit is hot to touch after it is turned off:
• Come on during Self Cleaning Cycle.
• Stay on even after the unit is turned off.
• Glow until the unit has cooled down to approximately 150°F.
LOCATIONS OF THE RADIANT
SURFACE ELEMENTS AND
CONTROLS
The radiant surface elements are located on the cooktop as
below.
The radiant control key locations are correlative to radiant
surface elements on the cooktop as shown below.
Left RearElement WarmingZone Right RearElement
ol-
,-,-(Power Failure) MESSAGE
The PF message will appear whenever there has been a
power interruption to the appliance. To clear the PF message
press ON/OFF control pad to reset and be sure to reset the
clock with the correct time of day.
Dual
Left Front
Dual Element
Right Front Element
-6-
To Next Page
Loading...
Need help?
General
