What does Inverter Compressor Discharge Pipe (D-Pipe) Overheat mean on my LG Air Conditioner and how can I fix it?
If your LG Air Conditioner displays an error indicating Inverter Compressor Discharge Pipe (D-Pipe) Overheat, contact LG Support. You can also try turning the air conditioner off and on again to see if that fixes the problem.
What does it mean when my LG Air Conditioner says the current-to-current transformer (CT) thermistor is too low?
If your LG Air Conditioner displays an error indicating that the current-to-current transformer (CT) thermistor is too low, contact LG Support. You can also try turning the air conditioner off and on again to see if that fixes the problem.
What to do if the outdoor unit inverter compressor PCB heat sink temperature is too high in my LG LS180HEV1 Air Conditioner?
If your LG Air Conditioner displays an error indicating that the outdoor unit inverter compressor PCB heat sink temperature is too high, contact LG Support. You can also try turning the air conditioner off and on again to see if that fixes the problem.
What does Current Transformer2 (CT2) error mean on my LG LS180HEV1 Air Conditioner and how can I fix it?
If your LG Air Conditioner displays a Current Transformer2 (CT2) error, indicating that the alternating current (AC) input is too high, contact LG Support. You can also try turning the air conditioner off and on again to see if that fixes the problem.
Why LG Air Conditioner does not work?
Your LG air conditioner might not be working due to several reasons: * The power cord might not be properly plugged into the outlet. Ensure it is securely connected. * A fuse may have blown, or the power supply could be blocked. Replace the fuse or check the circuit breaker. * There might have been a power failure. If so, turn off the air conditioner, wait 3 minutes after power is restored, and then turn it back on. * The voltage could be too high or too low, so check the circuit breaker. * The air conditioner might have turned off automatically due to a preset timer. Press the power button to turn it back on. * The batteries in the remote controller might be incorrectly installed or dead. Check the terminals (+) and (-) or replace them with new batteries.
What does it mean when my LG LS180HEV1 says the inverter compressor DC voltage is too high?
If your LG Air Conditioner displays an error indicating that the inverter compressor DC voltage is too high, contact LG Support. You can also try turning the air conditioner off and on again to see if that fixes the problem.
What does PSC Fault mean on my LG LS180HEV1 and how can I fix it?
If your LG Air Conditioner shows a PSC Fault, indicating that the current to the inverter compressor between the AC and DC converter circuit is too high, it's recommended to contact LG Support. A simple power down and restart might also help.
What does DC Peak (IPM Fault) mean on my LG LS180HEV1 and how can I fix it?
If your LG Air Conditioner displays a DC Peak (IPM Fault) error indicating that the compressor DC voltage was too high, contact LG Support. You can also try power cycling the unit by turning it off and then back on.
What to do if the outdoor unit condenser coil temperature is too high in my LG LS180HEV1?
If your LG Air Conditioner displays an error indicating that the outdoor unit condenser coil temperature is too high, contact LG Support. Additionally, try power cycling the unit by turning it off and then back on.
What to do if there is a communication failure from outdoor unit to indoor unit in my LG LS180HEV1 Air Conditioner?
If your LG Air Conditioner displays a communication failure from the outdoor unit to the indoor unit, please contact LG Support. You might also try turning the unit off and then back on to see if that resolves the problem.
General| Refrigerant | R410A |
|---|---|
| Indoor Unit Weight | 26.5 lbs |
| Cooling Capacity | 18000 BTU/h |
| Power Supply | 208/230V, 60Hz |
| Indoor Unit Noise Level | 42 dB |
General precautions and specific electrical safety measures.
Safety guidelines for installation and operating the unit.
Safety rules to follow during maintenance.
Identifies main parts of the indoor and outdoor units.
Details remote controller buttons and operations.
Guide to installing batteries and the remote controller holder.
Steps to establish communication between remote and unit.
Details cooling, heating, dehumidifying, and air circulation operations.
Adjusting air direction, swing, and fan speed.
Programming timer settings and sleep mode for unit control.
Covers Jet Cool/Heat, Auto Clean, Auto Operation, and Auto Changeover.
Energy saving, manual operation, and auto restart features.
Recommended cleaning frequency and safety warnings.
Step-by-step instructions for cleaning the air filter.
Using self-diagnosis and finding support contacts.
Addresses common problems and provides corrective actions.
Solutions for issues related to wired remote controllers.
To Next Page
