To Next PageTo Next PageWhat to do if there is a communication error between indoor unit and outdoor units in my LG LS240HSV3?
If your LG Air Conditioner displays a communication error between the indoor and outdoor units, please contact LG Support. You might also try turning the unit off and then back on to see if that resolves the problem.
What to do if there is a communication failure from outdoor unit to indoor unit in my LG LS240HSV3 Air Conditioner?
If your LG Air Conditioner displays a communication failure from the outdoor unit to the indoor unit, please contact LG Support. You might also try turning the unit off and then back on to see if that resolves the problem.
What to do if the outdoor unit condenser coil temperature is too high in my LG LS240HSV3?
If your LG Air Conditioner displays an error indicating that the outdoor unit condenser coil temperature is too high, contact LG Support. Additionally, try power cycling the unit by turning it off and then back on.
What does DC Peak (IPM Fault) mean on my LG LS240HSV3 and how can I fix it?
If your LG Air Conditioner displays a DC Peak (IPM Fault) error indicating that the compressor DC voltage was too high, contact LG Support. You can also try power cycling the unit by turning it off and then back on.
What does PSC Fault mean on my LG LS240HSV3 Air Conditioner and how can I fix it?
If your LG Air Conditioner shows a PSC Fault, indicating that the current to the inverter compressor between the AC and DC converter circuit is too high, it's recommended to contact LG Support. A simple power down and restart might also help.
What does it mean when my LG Air Conditioner says the inverter compressor DC voltage is too high?
If your LG Air Conditioner displays an error indicating that the inverter compressor DC voltage is too high, contact LG Support. You can also try turning the air conditioner off and on again to see if that fixes the problem.
What does it mean when my LG LS240HSV3 says the inverter compressor amperage is too high?
If your LG Air Conditioner displays an error indicating that the inverter compressor amperage is too high, contact LG Support. You can also try turning the air conditioner off and on again to see if that fixes the problem.
What does Current Transformer2 (CT2) error mean on my LG Air Conditioner and how can I fix it?
If your LG Air Conditioner displays a Current Transformer2 (CT2) error, indicating that the alternating current (AC) input is too high, contact LG Support. You can also try turning the air conditioner off and on again to see if that fixes the problem.
What to do if the outdoor unit inverter compressor PCB heat sink temperature is too high in my LG LS240HSV3 Air Conditioner?
If your LG Air Conditioner displays an error indicating that the outdoor unit inverter compressor PCB heat sink temperature is too high, contact LG Support. You can also try turning the air conditioner off and on again to see if that fixes the problem.
What does it mean when my LG LS240HSV3 says the current-to-current transformer (CT) thermistor is too low?
If your LG Air Conditioner displays an error indicating that the current-to-current transformer (CT) thermistor is too low, contact LG Support. You can also try turning the air conditioner off and on again to see if that fixes the problem.
General| Cooling Capacity | 24, 000 BTU/h |
|---|---|
| Heating Capacity | 27, 000 BTU/h |
| Coefficient of Performance (COP) | 3.5 |
| Refrigerant | R410A |
| Noise Level (Indoor) | 42 dB(A) |
| Type | Split System |
| Indoor Unit Weight | 14 kg |
| Outdoor Unit Weight | 45 kg |
