Web and Data 142
You can also make the device forget about the details of a Wi-Fi network that you have added.
For example, if you don't want the device to connect to it automatically or if it is a network that
you no longer use.
1. Turn on Wi-Fi, if it's not already on.
2. In the Wi-Fi settings screen, touch and hold the name of the network.
3. Tap Forget network.
Wi-Fi Protected Setup
Wi-Fi Protected Setup (WPS) is for the one-touch setup option to connect with the access points
which supply WPS.
To connect with Wi-Fi networks with WPS:
1. Locate your device near the access point that can be scanned.
2. From the Wi-Fi settings screen, tap Wi-Fi Protected Setup. It will start WPS and
Progress bar will be display.
3. Press WPS button of the access point or set up the WPS on the access point
configuration menu within 2 minutes. The access point will recognize the device and add
it to the network.
Wi-Fi Direct
Wi-Fi Direct supports a direct connection between Wi-Fi enabled devices without an access
point. Due to the high battery usage of Wi-Fi direct, it is recommended that you plug your phone
into a power outlet while using the Wi-Fi Direct feature.
To turn on Wi-Fi Direct:
1. Tap > > System settings > Wireless & network > Wi-Fi Direct settings.
2. Tap Wi-Fi Direct. (A green checkmark will appear.)
3. Follow the on-screen prompts to set up and use Wi-Fi Direct.
Data Services
With your Sprint service, you are ready to start enjoying the advantages of data services. This
section will help you learn the basics of using your data services, including managing your user
name, launching a data connection, and navigating the Web with your device.
Important: Certain data services requests may require additional time to process. While your
device is loading the requested service, the touchscreen or QWERTY keyboard
may appear unresponsive when in fact they are functioning properly. Allow the
device some time to process your data usage request.
To Next Page
Loading...
