Device Settings 66
To synchronize your device with your computer using the USB
1. Connect your phone to your computer with a USB cable.
2. Autorun will check whether MTP driver is installed or not in your PC.
3. If the driver is not installed, the MTP driver will be installed automatically and your PC
will be rebooted. After rebooting, it is possible to transfer any files between the phone
and the PC.
Note: For Windows® XP, MTP driver is not installed by default. So Autorun will install the MTP
driver automatically after checking existence of the driver. If Windows Media
Player(WMP) over version 10.x is installed on the PC, MTP driver may be installed. For
Windows® 7 except for N edition, the driver is installed.
USB tethering
You can share your device‘s data connection with a computer by turning on the USB tethering.
See Tethering and Portable Hotspot.
Ask on connection
Checkmark to have the device ask you to choose which USB connection mode it should
connect with to a PC.
Call Settings
Your device's Call settings menu lets you configure International call options and TTY mode.
Quick messages
North American Dialing
International Dialing
TTY mode
Proximity Sensor
Noise reduction
Voicemail settings
Save unknown numbers
Quick messages
Quick message is the specified text message to send out when you want to ignore an incoming
call and respond to the caller with instead. You can add or edit quick messages.
To Next Page
Loading...
