Device Settings 65
Network Mode
1. Tap > > System settings > Networks tab > Connectivity > Mobile networks
> Network mode.
2. Choose from the following two options:
Tap LTE/CDMA to turn on the LTE radio band.
Tap CDMA to turn off the LTE radio band.
Enable/Disable Data Access
1. Tap > > System settings > Networks tab > Connectivity > Mobile networks.
2. Tap Data enabled to check or uncheck it.
Connections Optimizer
PC connection
Your device's PC connection menu lets you configure USB connection type, USB tethering, and
Ask on connection.
USB connection type
You can select the default connection mode when connecting your device to a PC via USB.
1. Tap > > System settings > Networks tab > PC connection > USB
connection type.
2. Tap one of the following types:
Charge only to charge the device via USB.
Media sync (MTP) to use the device as MTP device. It allows transfer of protected
content from the device to PC and vice versa.
Camera (PTP) to connect your device as a camera to facilitate the transfer and
management of photos or videos. (When MTP is not supported, you can transfer files
between computer and your device with PTP connection.)
To Next Page
Loading...
