LG LS970 Sprint - Contacts; Get Started With Contacts; Access Contacts; The Contacts List

Device Settings 79
2. Tap the file name of the certificate to install. Only the names of certificates that you have
not already installed on your device are displayed.
3. If prompted, enter the certificate's password and tap OK.
4. Enter a name for the certificate and tap OK. You can now use the certificate that you
installed when connecting to a secure network. For security purposes, the certificate will
be deleted from the microSD card.
 If you have not already set a password for your devices credential storage, you will
be prompted to enter a password for it twice, then tap OK.
To set or change the password for your secure credential storage:
1. Tap > > System settings > Location & security > Set password.
2. Enter the current password, a new password, and confirm the new password. (Please
note that your password must have at least 8 characters.)
To delete all secure certificates and related credentials and reset its password:
1. Tap > > System settings > Location & security > Clear storage.
2. Tap OK in the confirmation dialog box..
Activate Location Mode
Before using any of the location-based services, you must turn on your device's location mode.
1. Tap > > System settings > Location & security.
2. Tap Use GPS satellites to place a checkmark and activate your GPS.
Activate Using Wireless Networks
This additional location feature uses mobile network connections to assist in providing additional
location accuracy.
1. Tap > > System settings > Location & security.
2. Tap Use wireless networks to place a checkmark and activate this feature. (A green
checkmark appears.)
 Since this feature is based on Googles location service, you will need to agree to
allow Google to collect anonymous information.
3. Tap Agree to accept the terms of service.