6) While using dispenser ice or water function and the door is opened the operation will be stopped.
7) If the water or ice Pad exceeds 3 minutes the Geared motor, cube or water solenoid will turn OFF automatically but the
duct door will remain opened 5 second after this interruption.
8) DISPENSER CRUSH/CUBE option selected by user is stored in EEPROM immediately after pressing the button.
9) While pressing a water pad the water will be dispensed and when water pad is release the water dispensing will stop.
10) DISPENSER PAD FUNCTION
- If Ice pad, water pad are activated at same time also water and ice will be
dispensed.
- If Ice pad, active water switch are activated at same time also water and ice will be
dispensed.
- If water pad, active water switch are activated at same time water pad has a
priority
-> if water pad has been activated, the active switch is ignored
-> If water pad has not been activated, active switch can be used.
11) WATER ACTIVATER LED INDICATOR
- LED Active switch become On when pressing Active switch and become Off
if active switch is not pressed.
- Through LED indicator user can recognized the status of water active function
- 20 -
To Next Page
Loading...
Need help?
General
