LG LSU121HSV3 - Speciality Application Devices

PRODUCT DATA | 41
Product Data
Due to our policy of continuous product innovation, some specications may change without notication.
©
LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG ” is a registered trademark of LG Corp.
ACCESSORIES
Table 16: Summary Data—Speciality Application Devices
Speciality Application
Device
Name Model No.
Connect
to
Application
Binary
Signals
Input/
Output
Description
Dry Contact Unit 24 VAC PQDSB1
Indoor
Unit
On/Off, Run Status,
Error Status
1/2
Enables the indoor unit to be
controlled and monitored by third
party controls using binary inputs
and outputs.
Dry Contact Unit for
Communication
PQDSBCGCD0
On/Off, Mode,
Controller Lock, Power
Save,Run Status,
Error Status
2/2
Dry Contact Unit for
Thermostat
PQDSBNGCM1
On/Off, Thermo On/
Off, Mode,Fan Speed,
Run Status,
Error Status
---
Enables the indoor unit to be
controlled and monitored by a
third party thermostat or
controller.
PI-485 V-net Control
Integration Board
1
PMNFP14A0
Outdoor
Unit
--- ---
Control integration to LG V-net
controls (AC Smart Premium,
ACP, BACnet, LonWorks, etc.)
Digital Output (DO) Kit PQNFP00T0
Comm
Bus
On/Off 0/1
One 25 amp DPST normally
open relay. Used with central
controller to control third party
device manually or by schedule.
1
The PI-485 is only available for use with models 18,000 Btu/h and larger.
Before specifying or placing an order, refer to the V-Net Network Solution Engineering Product Data Book and review the detailed technical data provided to fully understand the capabilities and limitations of these
devices.