6 | INTRODUCTION
Single Zone High Efciency, Standard and Extended Pipe Wall Mount Engineering Manual
Due to our policy of continuous product innovation, some specications may change without notication.
©
LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
Benefits of Single Zone Wall
Mount Systems
• Available from 9,000 - 33,000 Btu/h
• Inverter technology
• All season use - heat pump models for both
cooling and heating capabilities
• Operating range for outdoor units of 14°F to
118°F in cooling and -4°F to 75°F in heating
• Operating range for indoor units of 64°F to
90°F in cooling and 60°F to 86°F in heating
• Quiet operation inside and outside
• Duct-free split system
Convergence of Technological Innovation with Flexibility and Style
Single Zone Inverter
Wall Mount Systems
Single zone wall mount duct free split (DFS)
systems are among the industry’s best air-
conditioning units. Choosing an LG single
zone wall mount product provides a system
designer an edge to engineer a system with
individual control, and design flexibility with
advanced controls.
Single zone systems are available in a
nominal capacity range of 3/4 to 2-3/4
tons. These are best suited for applications
with zones that require heating or cooling,
such as residential, and small business
office buildings. Single zone wall mount
outdoor and indoor units are available in
208–230V/60Hz/1Ph.
Adaptable and Flexible
Single zone wall mount duct-free split (DFS)
systems allow cooling or heating for the
entire residence or just a single room
without the need for evasive ductwork.
There is no tearing down of walls or altering
the homes appearance. Long refrigerant
piping lengths allow for extra design flex-
ibility in indoor unit installation.
These units may be used for a number of
residential or commercial environments
such as:
• Older homes
• New home construction
• Office buildings
• Restaurants
• Hospitals / Medical facilities
• Schools
• Nursing homes
• Retail establishments
• Place of worship
Inverter Technology
Inverter variable-speed DFS systems
are measurably quieter and consume
less energy than conventional air
conditioners. The inverter compressor
ramps up or down to match the required
room capacity and maintain the comfort
level. When the selected temperature
is reached, the inverter compressor
operates at low speed to maintain that
comfort level, thereby using less energy.
ARCHITECTURAL APPEAL
To Next Page
Loading...
Need help?
General
