ENGLISH
Owner's Manual 11
Natural Wind
Step3(Medium)Step2(Medium-low)Step1(Low) Step4(Medium-high) Step5(High)
ON/OFF
MODE
TEMP
FAN SPEED
Cooling
Auto
Changeover
Healthy
Dehumidification
Heating
(Heat pump model only)
Air Circulation
Auto Changeover (Optional)
Operating Instructions
Press the ON/OFF BUTTON to turn the unit on.
The unit will respond with a beep.
Open the cover of the remote controller and press the operation mode button. Each time
the button is pressed, the operation mode is shifted in the direction of the arrow.
For cooling or heating operation set the desired indoor temperature by pressing the
ROOM TEMPERATURE SETTING BUTTONS.
For cooling the temperature can be set within 18°C~30°C(64°F~86°F) and for heating the
temperature range is 16°C~30°C(60°F~86°F).
Set the fan speed with the remote controller. You can select the fan speed in six steps : low,
medium-low, medium, medium-high, high and natural wind by pressing the INDOOR FAN
SPEED SELECTION BUTTON.
Each time the button is pressed, the fan speed mode is shifted in the direction of the arrow.
1
2
3
4
Natural wind
❏
For fresher feeling, press the INDOOR FAN SPEED SELECTION BUTTON and set to Natural wind mode.
In this mode, the wind blows like a natural breeze by automatically changing fan speed.
Operation Mode
To Next Page
Loading...
Need help?
General
