The controls will look like the following.
ON/OFF BUTTON
Used to turn off/on the unit.
ROOM TEMPERATURE SETTING BUTTONS
Used to select the room temperature.
INDOOR FAN SPEED SELECTION BUTTON
Used to select fan speed in six steps low, medium-low,
medium, medium-high, high and natural wind.
Signal transmitter
Cooling Operation
Auto Operation or Auto Changeover
Healthy Dehumidification Operation
Heating Operation (Only heat pump)
Air Circulation
Operation Mode
SLEEP MODE AUTO BUTTON
Used to set sleep mode auto operation.
PLASMA BUTTON
Used to start or stop the plasma-purification.
SLEEP
To Next Page
Loading...