23
General Installation Guidelines
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
14. Reinstall the plastic wiring ring and route the sensor wires
through the ring (Figure 23).
15. Reinstall the refrigerant pipe support bracket (Figure 24).
16. Reinstall the pipe in and pipe out sensors (Figure 25).
17. Reinstall all front panels. Be sure to use the front panel included
in the downflow kit (Figure 26).
Figure 22: Reinstall Support Bracket.
Cabinet
Support
Bracket
Figure 23: Wiring Ring.
Plastic
Ring
Figure 24: Pipe Support Bracket.
Pipe
Support
Bracket
Figure 25: Reinstall Sensors.
Sensors
Figure 26: Reinstall Panels.
New
panel
Vertical Downflow Installation -
continued
Vertical Downow Installation
GENERAL INSTALLATION GUIDELINES