LG M197WD - Page 102

1 8. Tune Command (Command: m a)
I_ Select channel to following physical number.
Transmission
[m] [a] [] [set ID] [] [DataO] [] [Data]] [] [Data2] [cr]
Data 00 : High channel data
Data 01 : Low channel data
ex. No. 47 -> 00 2F (2FH)
No. 394 -> 01 88 (188H),
DTV No. 0 -> Don't care
Data 02 : 0x00 : ATV, 0xl0 : DTV, 0x20 : Radio
Channel data range
Analogue - Min: 00 - Max: 63 (0-99)
Digital- Min: 00 ~ Max: 3E7 (0~999)
[a][ ] [set ID][ ] [OK!NO] [Data] [X]
Data Min: 00 - Max: 7DH
1 9. Channel Add/Skip (Command: m b)
I_ To set skip status for the current Programme.
Transmission
[m] [b] [ ][set ID] [Data] [cr]
Data 00 : Skip
01 : Add
[b] [Set ID] [OK/NO] [Data] [X]
20. Key (Command : m c)
I_ To send IR remote key code.
Transmission
[m] [€][ ] [Set ID][ ] [Data] [Cr]
Data Key code - Refer to page 94.
Ark
[¢] [ ] [Set ID] [ ][OK!NO] [Data] [x]
21. Control Backlight (Command: m g)
I_ To Control the backlight.
Tran_mission
[m][g][ ] [Set ID] [ ] [Data] [Cr]
Data : Min: 00 ~ Max: 64 (*transmit by hexadecimal code)
[g] [ ][set ID] [ ][OK!NO] [Data] [x]
22. Input select (Command: x b)
(Main Picture Input)
I_ To select input source for main picture.
Tran _mi_si_n
[X][b] [] [set ID] [] [Data] [cr]
Data Structure
MSB LSB
Iololololololol ol
[--External Input / [--Input Number /
External Input Data
0 0 0 0 DTV
0 0 0 1 Analogue
0 0 1 0 AV
0 1 0 0 Component
0 1 1 0 ROB
1 0 0 0 DVI
1 0 0 1 HDMI
Input Number Data
0 0 0 0 Input1
0 0 0 1 Input2
0 0 1 0 Input5
[b] [] [Set ID][] [OK!NO] [Data][x]
Real data mapping 3(Equalize)
Step : OSD Step : OSD
00 : -24 16 : 1
00 : -23 17 : 3
00 : -21 18 : 4
00 : -20 19 : 6
00 : -18 20 : 7
00 : -16 21 : 9
00 : -15 22 : 10
00 : -13 23 : 12
00 : -12 24 : 13
00 : -10 25 : 15
00 : -8 26 : 16
00 : -7 27 : 18
00 : -5 28 : 19
00 : -4 29 : 21
00 : -2 30 : 22
00 : 0 31 : 24
101