WATCHING TV/PROGRAMME CONTROL
SOFTWARE UPDATE
Software Update means software can be downloaded through the digital terrestrial broadcasting system.
Select SETUP.
Select Software Update.
Save.
Select On or Off.
• If you select On, a user
confirm message box will be
displayed to notify that new
software is found.
* When setting "Software Update"
Occasionally, a transmission of
updated digital software informa-
tion will result in the following
menu on the TV screen.
Select the YES using the • I_
button and when you see the
following picture.
After Software Update is com-
pleted, the System takes about
one minute to restart.
- During Progress of a Software Update, please note the following:
• Power to the set must not be interrupted.
• The set must not be switched off.
• The antenna must not be disconnected.
• After Software Update, you can confirm the updated software version in Diagnostics menu.
41
To Next Page
Loading...
