01_To prevent equipment damage, never plug in any power cords until you have finished connecting all equipment.
ANTENNA CONNECTION
01_For optimum picture quality, adjust antenna direction.
01_An antenna cable and converter are not supplied.
1 Multi-family Dwellings/Apartments
Wall _ | (Connect to wall antenna socket)
Antenna
|
Socket _
OUted°:r__na_ _ RF Coaxial Wire (TS ohm)
(VHF, UHF) I Single-family Dwellings/Houses
(Connect to wall jack for outdoor antenna)
UHF
VHF
Signal
Amplifier
01_In poor signal areas, to get better picture quality, install a signal amplifier to the antenna as shown above.
0_ If signal needs to be split for two TVs, use an antenna signal splitter for connection.
11
To Next Page
Loading...
