SOUND & LANGUAGECONTROL
LANGUAGE SELECTION (IN DIGITALMODE ONLY)
The Audio function allows selection of a preferred language.
If audio data in a selected language is not broadcast, the default language audio will be played.
Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected
language is not broadcast, the default language subtitle will be displayed.
When the languages you selected as the primary for Audio Language and Subtitle Language are not support-
ed, you can select language in secondary category.
Select OPTION.
Select Audio Language, Subtitle
Language.
Select your desired language.
Select OPTION.
Select Hard of
Hearing(r_1).
Select On or Off.
Save.
• Press the BACK button to move to the previous menu screen.
< Audio Language Selection >
I_ When two or more audio languages are broadcast, you can
select the audio language.
N.A
MPE_6G
Not Available
MPEG Audio
Dolby Digital Audio
Audio for "Visual Impaired"
Audio for "Hearing Impaired"
< Subtitle Language Selection >
I_ When two or more subtitle languages are broadcast, you
can select the subtitle language with the SUBTITLE button
on the remote control.
I_ Press the • • button to select a subtitle language.
N.A
D
Not Available
Teletext Subtitle
Subtitle for "Hard of Hearing"
The audio/subtitles can be displayed in a simpler form with 1 to 3 characters broadcast by the service provider.
When you select supplementary Audio (Audio for "Visual/Hearing Impaired") it may output a part of the Main audio.
68
To Next Page
Loading...
