TIMESETTING
AUTO ON/OFF TIMER SETTING
The Off time function automatically switches the set to standby at a preset time.
Two hours after the set is switched on by the on time function it will automatically switch back to standby mode
unless a button has been pressed.
The Off time function overrides the On timer function if both are set to the same time.
The set must be in standby mode for the On timer to work.
Select TIME.
Select Off time or On time.
Select Repeat.
Select Off, Once, Daily, Mon~ Fri, Mon
~ Sat, Sat ~ Sun or Sun.
Set the hour.
• To cancel On/Off Time function, select Off.
• For On Time function only
Select Mode.
Select TV, DTV or Radio.
Set the programme.
Adjust volume level at
switch-on.
Set the minutes.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
70
To Next Page
Loading...
