EXTERNALEQUIPMENT SETUP
When connecting with a £uro Scart
Connect the Euro scart socket of the VCR to the Euro
scart socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs an AV switching signal via the Scart
lead, the set will auto switch to AV 1 mode on start of
playback, but if you want to keep on watching in TV mode,
press the • / • or NUMBER buttons.
If connected to AV2 Euro scart socket, select AV2 input
source.
Otherwise press the IN PUT button on the remote control
handset to select AV 1. The VCR playback picture appears
on the screen.
You can also record programmes received by the set on
video tape.
AV1 AV2
INSERTION OF CI
- To view the scrambled (paid) services in digital TV
mode.
- This feature is not available in all countries.
Insert the CI Module to PCMClA (Personal Computer
Memory Card International Association) CARD SLOT
of set as shown.
For further information, see p. 43.
18
To Next Page
Loading...
