APPENDIX
m Press the VOL + or - button.
m Sound muted? Press MUTE button.
Try another channel. The problem may be with the broadcast.
m Are the audio cables installed properly?
m Adjust Balance in menu option.
rollA change in ambient humidity or temperature may result in an unusual noise
when the product is turned on or off and does not indicate a problem with
the product.
Only RGB/DVI mode applied
If the product is in power saving mode, move the mouse or press any key.
m The signal from the PC (Video card) is out of the vertical or horizontal
frequency range of the product.
Adjust the frequency range by referring to the Specifications in this user's guide.
m The signal cable between PC and product is not connected. Check the signal cable.
m Press the +INPUT' button in the remote control to check the input signal.
85
To Next Page
Loading...
