LG M2280D-PU - PROGRAMMING CODES

117
APPENDIX
PROGRAMMING THE REMOTE CONTROL
PROGRAMMING CODES
The remote is a multi-brand or universal remote. It can be programmed to operate most remotely con-
trolled devices of other manufacturers. Note that the remote may not control all models of other brands.
Test your remote control.
To find out whether your remote control can operate the component without programming, turn on
the component such as a VCR and press the corresponding mode button (such as a DVD or VCR)
on the remote control, while pointing at the component. Test the POWER and CH ꕭꕮ buttons to
see if the component responds properly. If not, the remote requires programming to operate the
device.
Turn on the component to be programmed, then press the corresponding mode button (e.g. VCR
or DVD) on the remote control. The remote control button of the desired device is lights up.
Press MENU and MUTE simultaneously, and then remote control is ready to be programmed with
the code.
Enter a code using the number buttons on the remote control. Programming code numbers for the
corresponding component can be found on the following pages. Again, if the code is correct, the
device will turn off.
Press MENU to store the code.
Test the remote control functions to see if the component responds properly. If not, repeat the process
from step 2.
Programming a Code into the Remote
DVD
1
2
3
4
5
6
Brand Codes Brand Codes Brand Codes
APEX DIGITAL 022
DENON 020 014
GE 005 006
HARMAN KARDON 027
JVC 012
LG 001 010 016 025
MAGNAVOX 013
MARANTZ 024
MITSUBISHI 002
NAD 023
ONKYO 008 017
PANASONIC 003 009
PHILIPS 013
PIONEER 004 026
PROCEED 021
PROSCAN 005 006
RCA 005 006
SAMSUNG 011 015
SONY 007
THOMPSON 005 006
TOSHIBA 019 008
YAMAHA 009 018
ZENITH 010 016 025